← All parts of this equation

Equation 4 · Part 15 · Comparing the Main Approaches to Scientific Instruments and Metrology

Numerator: partial f

uc2(y)=∑i=1N(∂f∂xi)2u2(xi)u_c^2(y) = \sum_{i=1}^{N} \left( \frac{\partial f}{\partial x_i} \right)^2 u^2(x_i)
∂f\partial f

What this part means

The complete quantity above the fraction bar.

Its job in the formula

partial f occurs above the fraction bar. The numerator is divided by the entire denominator below it.

The passage around this formula

Uncertainty itself has a standard grammar, laid out in the GUM and adopted domestically by NIST in Technical Note 1297. Every source of doubt about a measured value is classified as either a Type A evaluation — estimated from the statistical scatter of repeated observations — or a Type B evaluation — estimated from any other information, such as a calibration certificate, a manufacturer’s specification, or physical reasoning about a known systematic effect [ 2 ] [ 3 ] . These component uncertainties are combined, following an explicit propagation rule, into a combined standard uncertainty, which is then multiplied by a coverage factor (conventionally k=2 , corresponding loosely to a 95%…

Read this part in the article →

Learn the underlying idea

A fraction a/b means a divided by b. The top number is the numerator; the bottom number is the denominator, and it cannot be zero.

Open the illustrated fractions: division written vertically guide →

Sources cited in the surrounding passage

These citations provide research context; check each source for the exact claim it supports.